Here are updated and valid PDF Questions to pass CLSSGB-001 exam
Simply memorize their CLSSGB-001 questions and exam questions to ensure your success in the real CLSSGB-001 exam. They have created a comprehensive database of CLSSGB-001 Study Guide from the genuine test to help you practice with authentic CLSSGB-001 questions and Actual Questions, enabling you to pass the CLSSGB-001 exam on your first attempt. Just obtain their VCE test system and get ready to achieve success in the CLSSGB-001 exam.

To achieve success in the GAQM CLSSGB-001 exam, merely practicing the coursebook is not sufficient. At killexams.com, they are dedicated to clarifying your understanding of the CLSSGB-001 course blueprint, syllabus, and objectives, while equipping you with the knowledge to tackle complex scenarios and questions that may appear in the genuine CLSSGB-001 exam. Begin by downloading their complimentary CLSSGB-001 PDF sample questions and reviewing them thoroughly. If you find them valuable, proceed to register and obtain the complete version of CLSSGB-001 Mock Exam at an exclusive discounted rate. Upon downloading, you can also install the CLSSGB-001 VCE exam simulator on your computer and engage in regular practice with CLSSGB-001 Exam Questions to reinforce your preparation.

For those who are always on the move, the CLSSGB-001 exam questions PDF can be downloaded on any mobile device or computer, allowing you to study and memorize genuine CLSSGB-001 questions during your spare time. Continuously practice with the VCE test system until you feel fully prepared to ace the real CLSSGB-001 exam. Their CLSSGB-001 exam questions is offered in two convenient formats: CLSSGB-001 PDF file and CLSSGB-001 VCE exam simulator. The PDF can be viewed on any device, and you even have the option to print CLSSGB-001 Exam Questions to create a personalized study book. With an impressive pass rate of 98.9% and a 98% similarity between their CLSSGB-001 study guide and the genuine exam, killexams.com ensures you pass the GAQM CLSSGB-001 exam swiftly and efficiently in just one attempt.

Visit killexams.com today to take the first step toward certification success!

Lean Six Sigma Green Belt Certification

A Council for Six Sigma Certification (CSSC) Certified Lean Six Sigma Green Belt is an individual that possesses a thorough understanding of enhanced problem-solving skills, with an emphasis on the DMAIC (Define, Measure, Analyze, Boost and Control) model. The Green Belt Certification designation also reflects the knowledge by the individual to serve as a trained team member within his or her function-specific area of the organization. This focus allows the Green Belt to work on small, carefully defined Six Sigma projects, requiring less than a Black Belts full-time commitment to Six Sigma throughout the organization.



The Council for Sigma Certification (CSSC) offers 2 different paths to earning a Lean Six Sigma Green Belt Certification. Individuals who have already received training, and feel that they have significant understanding of the Topics covered in the Green Belt Certification “Body of Knowledge,” can simply sit for their standard comprehensive examination.



Individuals who are instead using one of their free Self-Study Guides, either independently or in conjunction with a training provider, can sit for several short exams as they progress through the different sections (as opposed to a single large comprehensive exam).



As an added benefit, those seeking the second option towards Certification would be able to obtain the various levels of their standard certifications (White Belt, Yellow Belt, Green Belt, and Black Belt) as they progress through their certification journey, without incurring any additional examination fees.



Either path will award their official certification(s). Either path is an open-book and non-timed examination format.

We feel the Multiple exam path to be the most beneficial option for those who are newer to the methodology, professionals looking for a solid refresher, or those candidates who would like to reduce their overall examination/certification costs.



To successfully obtain the professional designation of a CSSC Certified Lean Six Sigma Green Belt (CSSC-CSSGB) issued by The Council for Six Sigma Certification, candidates must successfully complete their CSSC Lean Six Sigma Green Belt Certification exam and achieve a score of 280 points (or higher) out of a total 400 possible points.



There are no prerequisites for taking the CSSC Lean Six Sigma Green Belt Certification Exam. Once the examination exam fee is paid, applicants will have 1 year to successfully pass the exam.


There is no project requirement for this Certification. However, this certification is a prerequisite for any individual wishing to pursue their Level II Green Belt Certification, which does have a project participation requirement.



After successfully fulfilling the certification requirements, candidates will receive an Official CSSC Lean Six Sigma Green Belt Certification issued by The Council for Six Sigma Certification, the most respected accrediting organization in the Six Sigma industry.



Our certifications have no expiration date. They strongly feel that certifications that require “renewals” only serve to increase the profits of the certification providers instead of benefiting the individual. Or put another way, a Masters Degree in Business does not expire… why would your professional certification=>



Candidates who would like to obtain a more recent certification date can always resit for the certification exam at any time (often for less money than a provider would charge for a “renewal”).



Upon completion of the requirements, individuals are issued a Lean Six Sigma Green Belt Certification in an electronic form. All certifications contain a verifiable certification number and the certification holder is added to the Council for Six Sigma Certification Official Register.



1. Introduction to Six Sigma (4.7 Hours)

• Higher Standards for Higher Performance

• Input Determines Output

• Six Sigma Defined

• Success Stories

• The Sigma Level

• The 99.9% Problem

• Calculating the Sigma Level – Toolset

• DNA of a Champion

• Six Sigma Framework

• DMAIC – The Six Sigma Improvement Process

• Lean and DMAIC

• Thought Process Mapping – Toolset

• Organizing for Success

• Working Relationships

• Critical Success Factors

• Whats in a Name=>

• Exercises and Quiz

2. Define I – The Value Stream (7.7 Hours)

• Introduction to Define

• Process Thinking

• The Source of Value

• Value Stream Leverage

• Process Mapping – Overview

• Process Mapping (SIPOC) Toolset

• Flow Charts

• Value-Added Flow Charts

• Spaghetti Charts

• Value Stream Mapping Toolset

• Pareto Chart Toolset

• Project Selection Toolset

• Project Charter Toolset

• Project Tracking Toolset

• Exercises and Quiz

3. Define II – Voice of the Customer (7.4 Hours)

• Introduction to Voice of the Customer

• Focus on the Customer

• Understanding Customer Requirements

• Where to Go for Customer Requirements

• Conducting Surveys

• More on Surveys

• Surveys – Sampling Frame

• Structuring Survey Questions

• The Degree of Uncertainty in Sampling

• Guideline for Margin of Error

• Affinity Diagram Toolset

• CTQC Tree Diagram Toolset

• Operational Definition Toolset

• Voice of the Customer as Specifications

• Progress Review

• Exercises and Quiz

4. Measure I (9.9 Hours)

• Introduction to Measure

• Measurements

• Discrete vs. Continuous Measurements

• Measurement Subjects

• Measurement as a Process

• The Analysis of Measurement Systems

• The Requirements of Measurement Systems

• Gage R & R

• MSA – Graphing

• Attribute Measurement System Analysis

• Calibration of Measurement Systems

• Collecting Data

• Developing a Sampling Plan

• Baseline Performance

• Derivative Performance Metrics – Throughput Yield

• Derivative Performance Metrics – Rolled Throughput Yield

• The Sigma Level Revisited

• Exercises and Quiz

5. Measure II – Charting Process Behavior (12.4 Hours)

• Introduction to Measure II

• Trend Chart Toolset

• Histogram Toolset

• Quantifying Process Variability

• SPC – Introduction and Background

• SPC – Introduction to Control Charts

• SPC – Control Chart Limits

• SPC – More On Control Limits

• Implementing SPC

• SPC Chart Selection

• Rational Subgrouping Toolset

• X and Moving Range Charts – Toolset

• Attribute Control Chart Toolset

• X-bar and R Chart Toolset

• Related Theory

• Process Capability Toolset

• Progress Review

• Exercises and Quiz

6. Analyze I – Possible Root Cause (10.2 Hours)

• Introduction to Analyze

• Finding the Root Cause

• Cause & Effect Diagram Toolset

• Alternative to the Cause & Effect Diagram

• 5-Why, 1-How

• A Combination of 5-Why, Pareto, and Trend Charts

• Scatter Plot Toolset

• Correlation and Regression Analysis

• Multiple Regression Toolset

• Logistic Regression Toolset

• Factors in Determining sample Size

• Estimating Population Mean

• Exercises and Quiz

7. Analyze II – Hypothesis Testing (13.3 Hours)

• Introduction to Analyze II

• Introduction to Hypothesis Testing

• The Process on Trial

• The Hypothesis – Accept or Reject=>

• Types of Error

• Hypothesis Testing

• Confidence Intervals

• Treatment Comparisons – Control Charts

• Comparing Two Proportions – Z-test Toolset

• Comparing Two Means – t-test Toolset

• Comparing Multiple Means – ANOVA/F-test Toolset

• Comparing Two Variances – F-test Toolset

• Confidence Intervals – Least Significant Difference

• Hypothesis Testing Learning Lab

• Exercises and Quiz

8. Analyze III – DOE (5.8 Hours)

• Design of Experiments – Introduction

• Design of Experiments

• Design of Experiments – Components

• Design of Experiments – Purpose

• Design of Experiments – Process

• Blocking

• Blocking and Tackling

• Progress Review

• Exercises and Quiz

9. Boost (10.7 Hours)

• Introduction to Boost

• Design for Six Sigma (DFSS)

• Benchmarking

• Brainstorming

• Narrowing Down the List of Ideas

• FMEA Toolset

• Error-proofing

• Continuous Flow Toolset

• Quick Changeover Toolset

• Pull Scheduling

• Prioritizing and Selecting a Solution

• Corrective Action Matrix

• Piloting a Solution

• System Dynamics

• Characteristics of Dynamic Systems

• System Dynamics Examples

• Another System Dynamics Example

• System Dynamics Application

• System Dynamics Summary

• Progress Review

• Exercises and Quiz

10. Control (6.5 Hours)

• Introduction to Control

• More on SPC

• The Process Control Plan

• More on FMEA

• Visual Control

• 5-S Approach

• Total Productive Maintenance

• TPM Objectives & Benefits

• TPM Metrics

• TPM Core Elements

• TPM Maintenance Activities

• Best Practices and Lessons Learned

• Documenting Process Changes

• Ending the Project

• Progress Review

• Exercises and Quiz

11. Leading Teams and Leading Change (4.8 Hours)

• Leadership Introduction

• Fueling the Improvement Engine

• Leadership Characteristics

• Practice, Study and Reflection – Learning by Modeling

• Leading Teams

• Developing an Effective Team

• Improving Team Development

• Leading Change

• Leading Change – Continued

• Success Factors for Effective Change Management

• Exercises and Quiz

• Course Completion

• The Lean Six Sigma Journey