Get 100% marks in 301 exam with these Premium Questions and Ans
The quality of their 301 Practice Test at killexams.com is excellent. You can download a free Question Bank sample Questions from their website before deciding to register for the complete LTM Specialist questions bank. You will be convinced of the quality. You may submit a manual update check anytime you like to confirm your 301 Cram Guide.

The internet is flooded with hundreds of companies offering Free Exam PDF services, but unfortunately, most of them are just reselling outdated dumps. It is crucial to find a reliable and trustworthy 301 PDF Download provider online, and in this regard, you can either conduct research on your own or rely on killexams.com. However, it is important to ensure that your research does not end up being a waste of time and money. Therefore, they recommend that you visit killexams.com, download the free 301 Mock Exam and evaluate the sample questions. If you are satisfied, register and get a three-month account to download the latest and valid 301 PDF Download that contains actual exam questions and answers. Moreover, you should also obtain 301 VCE exam simulator for practice purposes.

If you are looking to pass the F5-Networks 301 exam to secure a good job, then you must register at killexams.com. Numerous professionals are working hard to collect 301 actual exam questions for killexams.com, so you can rest assured that you will get reliable and updated 301 exam questions to ensure your success. You can download updated 301 exam questions at any time, free of cost. However, be careful when relying on free 301 PDF Download available on the web, as Valid and 2025 Up-to-date 301 PDF Download is a serious issue. Therefore, reconsider killexams.com before relying on any free 301 PDF Download available on the web.

The 301a-LTM Specialist: Architect, Set-up & Deploy exam is one of two exams

required to achieve Certified F5 Technology Specialist, LTM status.

Individuals who pass this exam possess an of underlying principles – from SSLbased VPN implementation to symmetric and asymmetric acceleration – and can

draw on that insight to integrate BIG-IP Local Traffic Manager (LTM) into existing
networks as well as new implementations. This is exam 1 of 2 and is based on
TMOS v11.



Objective 1.01 Given an expected traffic volume, determine the appropriate SNAT
configuration

Explain when SNAT is required

Describe the benefit of using SNAT pools

Objective 1.02 Given a scenario, determine the minimum profiles for an application U/A

Explain security options available for the application

Explain how to use LTM as a service proxy

Describe how a given service is deployed on an LTM

Objective 1.03 Given an application configuration, determine which functions can be
offloaded to the LTM device

Explain how to offload HTTP servers for SSL compression and caching

Objective 1.04 Given an application configuration, determine which functions can be
offloaded to the LTM device

Explain how to create an HTTP configuration to handle an HTTP server error

Objective 1.05 Given an application configuration, determine the appropriate profile and
persistence options

Explain how to create an HTTP configuration for mobile clients

Explain how to create an HTTP configuration to optimize WAN connectivity

Determine when connection mirroring is required

Objective 1.06 Explain the steps necessary to configure AVR U/A

Explain the steps necessary to configure the AVR

Explain how to create an AVR profile and options

Objective 1.07 Given a set of reporting requirements, determine the AVR metrics and entities
to collect

Explain the sizing implications of AVR on the LTM device

Explain the logging and notifications options of AVR

Explain the uses of the collected metrics and entities

Objective 1.08 Given a scenario, determine the appropriate monitor type and parameters to use

Explain how to create an application specific monitor

Given a desired outcome, determine where to apply health monitors

Determine under which circumstances an external monitor is required

Objective 1.09 Given a set of parameters, predict an outcome of a monitor status on other
LTM device objects

Determine the effect of a monitor on the virtual server status

Determine the effect of active versus inline monitors on the application status or on the LTM device

Objective 1.10 Given a set of SSL requirements, determine the appropriate profile options to
create or modify in the SSL profile

Describe the difference between client and server SSL profiles

Describe the difference between client and server SSL processing

Objective 1.11 Given a set of application requirements, describe the steps necessary to
configure SSL

Describe the process to update expired SSL certificates

Describe the steps to incorporate client authentication to the SSL process

Objective 1.12 Given a set of application requirements, determine the appropriate virtual
server type to use

Describe the process to update expired SSL certificates

Describe the steps to incorporate client authentication to the SSL process

Objective 1.13 Given a set of application requirements, determine the appropriate virtual

server configuration settings

Describe which steps are necessary to complete prior to creating the virtual server

Describe the security options when creating a virtual server (i.e., VLAN limitation, route domains, packet
filters, iRules)

Objective 1.14 Explain the matching order of multiple virtual servers U/A

Objective 1.15 Given a scenario, determine the appropriate load balancing method(s) U/A

Identify the behavior of the application to be load balanced

Differentiate different load balancing methods

Explain how to perform outbound load balancing

Explain CARP persistence

Objective 1.16 Explain the effect of LTM device configuration parameters on load balancing
decisions

Differentiate between members and nodes

Explain the effect of the load balancing method on the LTM platform

Explain the effect of CMP on load balancing methods

Explain the effect of OneConnect/MBLB on load balancing

Explain how monitors and load balancing methods interact

Section 2: Set-up, administer, and secure LTM devices Cognitive
Complexity

Objective 2.01 Distinguish between the management interface configuration and application
traffic interface configuration

Explain the requirements for management of the LTM devices

Explain the requirements for the application traffic traversing the LTM devices

Explain how to configure management connectivity options: AOM, serial console, USB & Management
Ethernet Port

Objective 2.02 Given a network diagram, determine the appropriate network and system

settings (i.e., VLANs, selfIPs, trunks, routes, NTP servers, DNS servers,
SNMP receivers and syslog servers)

Explain the requirements for self IPs (including port lockdown)

Explain routing requirements for management and application traffic (including route domains and IPv6)

Explain the effect of system time on LTM devices

Objective 2.03 Given a network diagram, determine the appropriate physical connectivity U/A

Explain physical network connectivity options of LTM devices

Objective 2.04 Explain how to configure remote authentication and multiple administration
roles on the LTM device

Explain the relationship between route domains, user roles and administrative partitions

Explain the mapping between remote users and remote role groups

Explain the options for partition access and terminal access

Objective 2.05 Given a scenario, determine an appropriate high availability configuration (i.e.,
failsafe, failover and timers)

Explain the relationship between route domains, user roles and administrative partitions

Explain the mapping between remote users and remote role groups

Explain the options for partition access and terminal access

Objective 2.06 Given a scenario, describe the steps necessary to set up a device group,
traffic group and HA group

Explain how to set up sync-only and sync-failover device service cluster

Explain how to configure HA groups

Explain how to assign virtual servers to traffic groups

Objective 2.07 Predict the behavior of an LTM device group or traffic groups in a given failure
scenario

Objective 2.08 Determine the effect of LTM features and/or modules on LTM device
performance and/or memory

Determine the effect of iRules on performance

Determine the effect of RAM cache on performance and memory

Determine the effect of compression on performance

Determine the effect of modules on performance and memory

Objective 2.09 Determine the effect of traffic flow on LTM device performance and/or
utilization

Explain how to use traffic groups to maximize capacity

Objective 2.10 Determine the effect of virtual server settings on LTM device performance
and/or utilization

Determine the effect of connection mirroring on performance

Objective 2.11 Describe how to deploy vCMP guests and how the resources are distributed R

Identify platforms that support vCMP

Identify the limitations of vCMP

Describe the effect of licensing and/or provisioning on the vCMP host and vCMP guest

Describe how to deploy vCMP guests

Explain how resources are assigned to vCMP guests (e.g., SSL, memory, CPU, disk)

Objective 2.12 Determine the appropriate LTM device security configuration to protect
against a security threat

Explain the implications of SNAT and NAT on network promiscuity

Explain the implications of forwarding virtual servers on the environment security

Describe how to disable services

Describe how to disable ARP

Explain how to set up logging for security events on the LTM device

Explain how route domains can be used to enforce network segmentation

Section 3: Deploy applications Cognitive

Complexity

Objective 3.01 Describe how to deploy and modify applications using existing and/or updated
iApp application templates

Identify the appropriate application template to use to deploy the application

Describe how to locate, retrieve and import new and updated application templates

Identify use cases for deploying the application templates

Objective 3.02 Given application requirements, determine the appropriate profiles and profile
settings to use

Describe the connections between profiles and virtual servers

Describe profile inheritance

Explain how to configure the different SSL profile settings

Explain the effect of changing protocol settings

Explain the use cases for the fast protocols (e.g. fastL4, fastHTTP)

Explain the persistence overrides

Describe the use of HTTP classes and profiles

Describe the link between iRules and statistics, iRules and stream, and iRule events and profiles

Describe the link between iRules and persistence

Describe hashing persistence methods

Describe the cookie persistence options

Determine which profiles are appropriate for a given application

Determine when an iRule is preferred over a profile or vice versa

Explain how to manipulate the packet contents using profiles

Objective 3.03 Determine the effect of traffic flow on LTM device performance and/or
utilization

Describe the effect of priority groups on load balancing

Explain the effects of SNAT settings on pools

Explain how persistence settings can override connection limits

Describe the relationship between monitors and state

Describe the functionality of Action On Service Down

Describe the functionality of Priority Group Activation

Describe the persistence across pools and services (e.g., Match Across Services, Match Across vs Match
Across Pools)

Describe how connection limits are affected by node, pool and virtual server settings

Describe how priority groups are affected by connection limits